Die Casting Release Agents

　　Based on our professional level in die casting and chemical industry,as well more than twenty years of research and development,Wealth die casting release agent has been widely recog-nized by the counterparts from quality to economic.The main ingredients of the products are imported,and some secondary materials are also purchased from domesticfirst-class enter-prises in China.The quality and performance of the products are not much different from those imported products.

 

　　Instructions for use:

 

　　1.Dilute with tap water(well water is prohibited for dilution),artificially slightly mixing(when automatic proportioning machine is used,it is prohibited to use the uninterrupted compressed air for mixing).Attention:the use of the above two prohibited items will result in“accumulation of broken emulsion”of the mold release agent;

 

　　2.Wealth Machinery spray gun or automatic spray system is adopted to achieve uniform spraying and drying,thus ensuring the quality of the castings;

 

　　3.Attention shall be paid to the control of the mold temperature,and the ideal mold temperature to use mold release agent is 200-300°C;

 

　　4.Dilution ratio:to be properly adjusted according to the complexity,mold depth ratio,aluminum alloy Si content and zinc alloy of the castings.

 

　　Physical and chemical indexes:

 

　　unlimitedly soluble in water(water soluble),milk white liquid(the liquid drop has the bluish polarized light),withoutflash spots,aromatic smell,pH 8.0-9.0,density 0.96-0.97g/cm3.

 

　　Reference dilution ratio:

 

　　Small and medium-sized castings,zinc alloy dilution ratio:1:100~1:120

 

　　Large-sized complex castings,deep cavity dilution ratio:1:80~1:100

 

　　Pure aluminum and low-Si aluminum alloy dilution ratio:1:50~1:60

 

　　Notes:

 

　　Storage caution:keep from frost and sunshine,store indoor,seal properly after opening Expiry date is 12 months in the original liquid seal status

 

　　Emergency treatment:if splashed in eyes,immediately wash with water